Little trick to get rid of Windows account Password!

little trick that might help you!

Method one: Login with the default administrator account

Step 1: Start Windows PC
Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
Step 3: Type Administrator as Username and leave the Password field blank
Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.

Note: When you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.

Method two: TRY command prompt about password reset trick

1. Log in with any valid account.

2. Bring up the command prompt.

Type: net user

You get a list of accounts

Type: net user Administrator *

Type: net user (any account on that list) *

3. It prompts for a password. Enter one, then enter it again when prompted to confirm.

Now, try to log on as 'Administrator' with your new password. *

Please note that this might not work on a LIMITED account .

Method three : use a Windows Password Recovery cd

1. Visit the windows Password Recovery tool official site:  http://www.windows7password.net/

2. Download the tool and run it

3. Burn the password reset cd to a blank CD/DVD or USB flash drive

4. Turn to the computer which you lost password, reboot it, insert the nearly created recovery disk.

5. Click Del key to load bios setting, set the system load from cd/dvd or usb, save the change

6. reboot the computer, load the password recovery software

7. select the windows os installation folder, select the user accout , reset the password

8. finish. you can login windows with a blank password now.

Automatically Login Windows 7 Without Typing login Password

In this tutorial I will tell you how to configure Windows 7 OS to automatically connect without prompting you to enter your login password each time user account. Although in this example can be found on many other sites, we have decided to publish them. The problem with other similar guides is that they are not complete and not to give you all information you need to know. So I will try to guide you through all stages and share them with you all the information you need to know in order not to ruin the computer.

First, open the Run window by pressing the Windows key + R or launch the Command Prompt. Type one of the following two commands: netplwiz.exe or control userpasswords2. No matter which one you use, they have identical results and launch the same window.

Once you run the command, a User Accounts window similar to the one below will launch. There you will see the list of users registered on your PC. Select the user for which you no longer want to type the password in order to log in to Windows 7. Uncheck the option which says 'Users must enter a user name and password to use this computer' and click on OK.

Now you will be asked to type right  user password of the user twice. After done, click on OK.

The next time you will start Windows 7, you will be automatically logged on with the user you just selected. This user will become the default log on user to Windows 7.

IMPORTANT NOTES:

If you have multiple users on your PC, the definition of that definition could be a disadvantage. Windows 7 will still automatically connect to the user that you selected during this procedure. Sign in to join to have another user wait for Windows 7 to boot and connects you automatically to disconnect, then the other user you wish to register. If you set things on how they followed the same procedure and make sure you check the option which says 'Users must enter a user name and password to use this computer'.

If  this Windows 7 PC has joined a network domain, such as a company network, this procedure will not work. In network domains, the policies regarding the log on procedure are set by the network administrator and cannot be overwritten by users. If you try this on your office computer, there is not way.

Related: Windows 7 Password Recovery

Tips to bypass administrator Password on Windows Vista

A acclimatized bureau to all those who are in or with computers about acquire on the achievement that Windows Vista is one of the a lot of complicated and inadequate, but actually in computer operating systems, which are purchased and artificial today. The affliction is that abounding bodies are acclimatized to operating systems like Windows 98 and Windows 2000 or XP are Vista can be absolute difficult to acquire the functions of the operating system, a actually adapted level. Abounding adapted functions attainable on XP are not in Vista, and the circling speed.If you acquire a affliction with the abandoned adjure of a user of Vista on the computer, there are absolute things you can do and can not do on Windows Vista. What is the role of user password?

When a user is ancient created on a computer, the anniversary holder has an advantage to accomplish a password. The functionality of adjure is attainable to admonition bodies assure their claimed abstracts and software from added users on the computer.  While the agent can override to change the passwords and user accounts on adapted computers, admonition management, and the bill can not be afflicted afterwards the agent password. Just as the adjure of Windows Vista? Remember that Windows XP has a ashamed breach into an agent anniversary that the agent can change the password, even if you do not discount the original?

 

Well, Vista does not acquire this ability. This bureau that an agent adjure can be afflicted afterwards entering the adjure of origin. If you try to use a adjure to the acclimatized user who is not associated with the agent account, the adjure can even antithesis as connected as displace your agent password. The abandoned way to antithesis the agent adjure in Vista if you do not bethink that accession of Windows Vista adjure software to install or accomplishment new Vista with Accession CD. The affliction with the accession advantage that is harder because you are not the Agent anniversary in Vista is unable, applications, abstracts or files on your account, you allegation to access.This bulk compared to diplomacy a accession CD, if you acquire a (hard drives $ 100 and more), accession and the bulk of all abstracts will be lost.

The absorption would be wiser to beforehand in a diplomacy below cher to accession your adjure so you can acceptance to your agent account. What are added advantages to use adjure accession for Windows Vista Adjure Reset? When you buy a diplomacy to antithesis password, you acquire the adventitious to acquire your adjure at any time in the future, if you discount your password. Whereas, if you do not just buy software and reinstall Windows Vista, you accept to abate all your abstracts in the future, if you discount your password.

Help my friend to unlock Windows xp Password

I have an old friend who seems to always have problems with his PC. One of these  is lost windows passwords. I told him to remember always to set a short and easy password. But He still set long complicated passwords. So of course one day he forgot the password to his login screen on Windows XP Operation system. He brings pc to me and asks, "I forgot my login password. Can you give me a help?" I laugh and say "Of course!"

Below are the methods which I use to bypass his lost login password.

1. when you boot up pc, press F8 and select the safe mode at the following menu (or however your bios lets you select safe mode. If you are not sure how to do, just shut off PC while the Windows XP loading screen comes on and it will tell you windows had trouble starting blah blah...select safe mode. This is a method of last resort)
2. Select administrator account. There should be blank Password for this account. If there is, you may be screwed and you have to use the Windows Password Recovery Tool 3.0, it can bypass any windows password at any time.
3. Once you have log in to administer account, select account options. ( My Computer >> Control Panel >> User Accounts. and select the account you are locked out of.
4. Change this account’s password.
5. Congratulations!
There you have it. You can now reboot you pc and load windows in normal mode, then use the new set password to get back inside your account. Now you might be asking your self, "Well if it is quite easy to hack user password, is there a way to set user password that no one can hack?" Yes! A bios password is by far the most effective way to safe guard your PC from unwanted use. To do this simply go into bios settings and find the password option.

Hope this tip helps for you!

How To find out Windows 7 Administrator Password

Windows 7 administrator password is the password to any account that's setup to access administrator level functions in Windows 7.

There doesn't actually have to be an "Administrator" user account. What you need is the password to any account that can act as an administrator.

You will need to take a few times to get this password. You may need an administrator login password in Windows 7 if you're trying to run certain types of programs or access certain Windows 7 recovery tools.

Follow the steps below to efficiently find the administrator login password in Windows 7!

Difficulty: Average

Time Required: Finding the password to an admin user may take minutes up to hours depending on the situation

Here's step by step guide:

1. Try leaving the password blank. If there is actually an Administrator account, the password may not exist at all!

   Just press Enter without typing anything when the logon asked for it.

2. Enter the password to your account. Often times, depending on how Windows 7 was setup on your computer, the primary user account will also be an administrator user account.

3. Try to remember administrator login password. As I mentioned in the last step, your account might be an administrator account, especially if you installed Windows 7 on your computer yourself.

   If that's true, but you've forgotten your password, you might be able to make really good guesses at what the administrator password might be.

4. Have another user enter his or her credentials. If there are other users that have accounts on your Windows 7 computer, one of them may be setup with administrator access.

   If this is true, have the other user designate you as an administrator as well.

5. Recover the administrator password using a Windows password recovery tool. You may be able to recover or reset an administrator password with one of these free tools.

   Note: Some password recovery tools on the list I have in connection with the above change and the ability to set user accounts in Windows 7 Administrator account. This can be useful if you know the password, but it is not an administrator account.

6. Perform a clean install of Windows 7. This is a last resort option. This type of installation will completely remove Windows 7 from your PC and install it again from scratch.

   If you're just curious about the administrator password, I would not recommend this resort. However, if you need an administrator password to access the operating system of diagnosis and this is your last effort to save the computer running a clean install will work.

   Keep in mind that it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

Tips:

Looking for your administrator login password but you don't have Windows 7? See How to Find Windows Administrator Passwords for instructions tailored for other Windows operating systems.

Windows XP Administrator Account Password

What is Windows XP Administrator User Password?

Windows XP Operation system (both Professional and Home versions) have a "hidden" administrator account. Its default password is blank. In order to avoid serious security problems and protect your computer better, it is best to set a strong password for this account on your computer. To do that, follow these instructions:

  Turn off your computer completely. Wait 30 seconds, then restart it. When your computer manufacturer's logo appears on the screen (Compaq, HP, Dell, etc.), start pressing the F8 key on your keyboard. If you've done this correctly, a text menu will appear. Use the arrow keys on your keyboard to select "Safe Mode," then hit Enter.

  The next text menu will present you with an operating system selection. In most cases, you will only see "Microsoft Windows XP". Make sure this is highlighted, then hit Enter.

  When Safe Mode has loaded, you should be presented with the Welcome screen. Select "Administrator."  with your Mouse.

  While loading the Administrator account, you will be presented with a warning message. Click the OK button to running it safe mode.

  Open the Start menu, then click on Control Panel.

  In the Control Panel, double click the User Accounts icon.

  The User Accounts screen will list all user accounts that are present on your machine. Take note that you will likely have one for Administrator, and another one (that you named when setting up your computer initially). Select the Administrator user account.

  In the Administrator user account settings screen, click on the link for "Create a password."

  In the password creation screen, fill out the requested blanks When you're finished, hit the Create Password button.

  You may be asked if you want to make this account's files private. Click either Yes or No (depending on your preference, I suggest No), then click Finish.

  You should be returned to the User Accounts window. Close window XP, then restart your computer normally (not need to press F8 now).

NOTE: Make sure that you add account passwords on ALL of your computer's accounts.

If you forgot Windows XP Login Password, Click here to find out how to reset it.

Reset Windows Vista login password

One of the cornerstones of Windows Vista is security. Vista comes with User Account Control (UAC) system, firewall protection against malware, spyware, phishing filter, automatic updates, and, of course, that the procedure for logging into your account and password. All this is a great security and gives you peace of mind knowing that your system is protected, surfing the Internet.

However, if you're the only one who ever used the Windows Vista system in your home? Have you ever wanted to do it so that you to bypass the logon Windows Vista, and get right to work? There is a way that this task with a hidden tool called the Advanced User Accounts Control Panel to run.

In this release, Windows Vista Report, I'll show you how to circumvent the access and use of additional user accounts in Control Panel, Windows Vista logon procedure and essentially configure Vista to automatically log on when you turn on the system.

Accessing the hidden tool

To access the hidden Advanced User Accounts Control Panel, click the Start button, type “Control Userpasswords2″ in the Start Search box, as shown in Figure A, and press [Enter]. When you do, you’ll encounter a UAC dialog box and will need to respond accordingly.

Figure A

To access the hidden Advanced User Accounts Control Panel, you’ll type Control Userpasswords2 in the Start Search box.

In a moment, you’ll see the Advanced User Accounts Control Panel, as shown in Figure B. (As you can see, the dialog box is simply titled User Accounts.)

Figure B

The dialog box for the Advanced User Accounts Control Panel is simply titled User Accounts.

Configuring the automatic log on

To configure the automatic log on, select your user name in the Users For This Computer list, if it isn’t already selected. Then clear the Users Must Enter A User Name And Password To Use This Computer check box. When you do so, your Advanced User Accounts Control Panel will look like the one in Figure C. To continue, click OK.

Figure C

Once you clear the Users Must Enter A User Name And Password To Use This Computer check box, the Users For This Computer list becomes unavailable.

As the last step in configuring the automatic log on, you’ll see the Automatically Log On dialog box, shown in Figure D, and will need to type your password in both the Password and Confirm Password text boxes. To complete the operation, click OK.

Figure D

You’ll be prompted to type your password in the Automatically Log On dialog box.

To test your Automatic log on, simply restart your computer. When you do, Windows Vista should automatically log you on.

What’s your take?

Now that you know how to access the Advanced User Accounts Control Panel and enable the automatic log on feature, will you do so? Please drop by the Discussion Area and let us in on your thoughts.

Finally Solution

I usually used the cheapest and easy to use tools, especitally free trial: like Windows Password Recovery tool 3.0  to reset Windows XP password.