What is the Windows Vista Administrator’s Login Password?

When you have installed Windows Vista first time, how long did it take you to realize that you lost the administrator’s password? With me it was about a week before I needed to make some changes in the file system. It suddenly occurred to me that being logged in as administrator might make the User Account Control dialog box go away, but I didn’t know the administrator’s password! What the heck is the Vista administrator’s default password?

Unlike the previous releases of Windows, Windows Vista does not automatically create an Administrator account during installation. The theory is that the typical Windows user does not need to run with administrator privileges. Using a non-administrator account will prevent a Windows user from accidentally deleting operating system folder, files, and registry information, and prevent any Malware infecting the computer from doing the same. However, if you really need to run as an Administrator, you can easily activate the built-in Administrator account yourself.

Here are the basic steps to activate Vista’s Administrator account and assign it a password:

1. Logon to Vista using a standard user account
2. From the Start menu, navigate to the Command Prompt menu item in the Accessories menu
3. Right-click on the Command Prompt menu item and select Run as Administrator
4. Click the Continue button on the User Account Control dialog box
5. At the command prompt, enter net user administrator password, and hit Enter
6. At the command prompt, enter net user administrator activate:yes, and hit Enter
7. At the command prompt, enter exit and hit Enter to close the command window
8. Log off and logon as Administrator using the password you selected

This procedure activates a user account named Administrator and assigns it Full Control security privileges. The user name “Administrator” is reserved, so you cannot create a user account with this name even if you haven’t activated the built-in Administrator account. Depending on the local password policy of the computer, you might be required to enter a password of a minimum length or complexity, and not be allowed to use a blank password.

I Forgot my Vista Administrator Password!

The User Accounts applet in Control Panel features the Create a password reset disk wizard. Using this wizard, a floppy disk or USB flash drive can be created that allows the password of a specific user account on a specific Windows Vista computer to be reset by the user. Possession of the reset disk is considered to be authorization to reset the account’s password. The reset disk can also be reused to reset the account’s password multiple times. However, you need to know the password of the account you want to create the reset disk for, and you must create the reset disk before you forget the account’s password.

To use the Vista password reset disk:

1. Insert the floppy or USB reset disk in the computer
2. Click the Reset password… item on the Vista logon screen to start the Password Reset Wizard
3. Click the Next button
4. Enter a new password
5. Reenter the new password
6. If prompted, enter a password hint
7. Click the Next and Finished buttons
8. Enter your new password to logon to the user account

I Didn’t Make a Password Reset Disk!

OK, you can reset a forgotten Windows Vista password without a Vista password rest disk, but you won’t receive any help from Vista to do it. Instead, the Windows Password Recovery Tool 3.0 is you ticked.

Having the ability to reset forgotten passwords and gain administrator access to your computer and can be a great time saver, but should only be a attempted by an IT professional. Using sophisticated system manipulation tools, you can easily make things worse rather than better.

Reset Windows 7 Password with Pen Drive

Most of us have a PC at home and one at work. We use our work PC most of the times and home PC comparatively less. Had it ever happen to you that you forgot your Windows password? Maybe you go for a month long vacations or business trip and when you are back, you may forget some of your passwords to the PC. We tend to have lots of passwords at work, online and at various computers. So to save yourself from a locked out situation, we recommend that you create a password reset disk. In this article, I will share with you a very simple method to create a Windows 7 password reset pen drive. So next time you are locked out of Windows 7 at the login screen, you can plug in this USB pen drive in your computer and reset Windows 7 password.

Windows 7 is the latest public release version of Microsoft Windows, a series of operating systems produced by Microsoft for use on personal computers, including home and business desktops, laptops, netbooks, tablet PCs, and media center PCs. Windows 7 still using the same encrypt arithmetic as the previous versions of windows. That mean if you need to reset Windows password, you can just use the similar methods like on windows Vista or Windows XP. To create a Windows 7 password reset pen drive, I advice to have a small capacity pen drive which is cheap and you should keep it at a safe place, but not so safe that you forget where you kept it when you need it sometime in future.

Follow these simple steps:

Step 1. Insert a pen drive (backup any data if present on the pen drive and delete everything). Then go to Windows 7 Start Menu and type “create password reset disk” in the start menu search and launch the program “Create a password reset disk” which will be highlighted in the search results.

Step 2. Just follow the simple Password reset wizard as seen below, by selecting the pen drive from a list of drives it will show you. Note: If you have not inserted a pen drive before launching the utility, it will not work and will give an error. If the pen drive is in place, you will see the wizard . It will also ask for your current password to create a password reset pen drive.

Step 3. Now you simple need to keep this drive at a safe place. You can use this in case you forget your Windows 7 Password sometime in future, just click forgotten password on the login screen and choose the option to Reset password after inserting this pen drive into any of the working USB ports of your computer.

NOTE: Windows will honor only the most recent password reset disk that you have created, so in case you happen to create more than one disk, only the one which is latest will work, all other old password reset disk will not be able to reset the Windows password.

If you have not created a reset disk and have forgotten your password, you can still reset the password by using some utilities which is used for Windows 7 password recovery. But these processes maybe tedious, lengthy and may cost you money if you need to buy a software to do that. So to avoid any inconvenience later, we recommend that you create a password reset disk.

Create Windows 7 Password Reset Disk

Windows 7 is coming. Are you using windows 7? How can you do if you forgot your windows 7 user password. You can use a password reset disk to create a new password.

Depending on the machine and user involved, losing a password for an account can be anything from a pain to a disaster. Fortunately, in Windows Server 2003 and Windows XP there's something you can do to prepare for such an eventuality: create a password reset disk.

In Windows Server 2003 you can create a password reset disk for any local user account on a member server (a nondomain controller in a domain) or stand-alone server (a server in a workgroup). You can't create a password reset disk for a domain controller because a domain controller doesn't have any local user accounts, only domain accounts stored in Active Directory.

A typical use for a password reset disk would be to create one for the all-powerful local Administrator account on your server. To do this, get a blank formatted floppy and follow these steps:

Microsoft recommends that users should create a password reset disk when they create their passwords so that they will not lose access to their files and other information.
The password reset disk can be created with many removable media, including USB flash drives, CD’s and DVD’s and floppy disks.
The action is initiated in the user accounts panel, where the user clicks on the “Create a password reset disk” option. This opens the Forgotten Password Wizard which prompts the user to insert the media, and creates the disk.
No matter how many times the user changes their password they only need to create the password reset disk only once.

Have You Lost Windows Recovery/restore/installation Cd Disk And Wondering How To Recover Your Computer?

When you buy a new PC / laptop on a recovery CD for Windows system files or install individual Windows components that you get when something goes wrong. But chances are, you can go to the Recovery CD lost. As you would an operating system to correct errors that case you lost the recovery disk?

Many PC manufacturers do not provide recovery CDs in those days. Instead, the recovery files are stored in a hidden partition on the hard disk, making it more difficult to correct for errors when a hard drive crash. And the only way to replace Windows on a hard disk in this case again on a disk of PC manufacturers, the home demand. And most of the hard drive from the PC was made available was an OEM (Original Equipment Manufacturer) version to be lacking some features of a full version and are not entitled to updates.

Does not provide operating system installation CD is ideal for PC manufacturers and producers, but not for us - the PC user. Sometimes errors can only be obtained by copying a single file system be established. If you have a recovery CD into the CD-ROM, you reformat the hard disk and an image from your computer that has a replica of how the system on the day you purchased it (the default) is to reinstall. Any changes made will be wiped out. All of these programs you have installed all the patches and updates from Microsoft, everything is gone. The same applies if you return one of these hidden partitions

But how do you restore your windows installation cd image from hidden partition?

We hope that is what he did, producer copy of Windows XP CD-ROM image on your hard drive. Hard drives are so large these days that it takes up little space and has some advantages speak in a second.

To determine if the image of the CD ROM will appear on your computer, look for a folder called I386. There may be different, but what interests us in the vicinity of 7000 contains the files that are two of them and Winnt.exe winnt32.exe. The I386 directory is typically one of the top-level directory on the CD-ROM distribution, but above is the directory that contains the distributed copy of Windows XP. Winnt.exe and Winnt32.exe are the DOS and protected mode setup programs, respectively. (You should only need this if you intend to see to reinstall Windows XP from scratch - I use it as an easy way that we have the correct directory.) Now that you know that the CD - What happens if ' image ROM calls following the CD-ROM?

Do not worry, it's actually quite simple. Insert a rule, the "CD" message is only an OK button and "Cancel". Press OK, so you can not. In the next dialog box, called a rule, give the location of the CD-ROM, simply type the full path to the I386 folder have previously discovered.

That's it. But it gets better. Windows remembers. Now that you mentioned, where the Windows installation CD-ROM is to remember, dass The next time you are in a situation that might require the installation CD of Windows is at first sight when he discovers what is not needed then to worry about asking.

Personally, I think the practical thing - so that even if I close my Windows CD I'm also on my hard drive and copy of Windows at this point you copy the first time you have requested. Then it is not necessary to think or to insert the CD. And this technique works for many other CD-ROM products, including Microsoft Office.

Also refer to Microsoft's knowledge base

An easy way to fix your PC. Lost your recovery disk? No need to reformat the hard drive or reinstall OS to fix your computer problems. Please Visit

http://www.windowspasswordsrecovery.com

13 Steps to Change or Recover Administrator login Password in Windows XP

Have you lost your Windows XP administrator login password, and you don’t know what to do? Here are thirteen simple steps that you can use to change or recover administrator login password of your Windows XP computer.

1. Insert the Windows XP CD in your CD / DVD drive and restart your computer with him. To do this, after ensuring that established the system BIOS to boot from the CD as first choice. Check your system BIOS to see what is more.
2. a “Press any key to boot from CD or DVD” message is displayed, press a key to boot from the Windows XP disk.
3. Windows Setup will now inspect your system and load the required files.
4. On the “Welcome to Setup” screen, press Enter to start Windows Setup.
5. Scroll down the Licensing Agreement screen and then press F8 to accept it and proceed further.
6. On the Setup screen that is displayed next, you may get an option to repair Windows. Select the Windows XP installation you want to repair and then press R to start the Windows repair process.
7. During the repair process, Setup will first check the disks on your computer and then start copying the required files. This task will take a few minutes.
8. After the files are copied, you will be asked to restart the PC. If you don’t, PC will restart automatically after 15 seconds.
9. When the PC restarts, don’t choose to boot from CD. Setup will automatically resume and you will see a message box informing you that the Windows installation is on.
10. During this process, you need to keep an eye on the left had panel of the screen that informs you about the setup status. When you see that the “Installing Devices” task is in progress, press the Shift + F10 key. This will open a Command Prompt window that you can use to perform several admin tasks on your computer. Surprised! Well, yes the world’s most popular operating system does have a few security loopholes.
11. At the command prompt, type NUSRMGR.CPL and then press Enter. The User Accounts control panel window will display.
12. In the User Accounts window, you can perform various user management tasks, such as, reset passwords, change password, create new user, and configure no password login. After making the required changes, close the dialog box, exit the Command Prompt window and then proceed with the repair process. You may need the Windows XP product key, so keep it handy.
13. After the repair process is complete, you will be able to log on to your Windows XP computer using the new password you set during the repair process. In case, you choose not use a password, you will not be asked for one.

This process will not have any affect your existing programs and personalized user settings. However, if you find this method to change or reset administrator password in Windows XP complicated, you may opt to use a reliable third-party tool, such as Windows Password Recovery Tool .

This is a real handy tool that enables users to perform several Windows recovery tasks, such as recover passwords, make and restore data backup, manage partitions and recover lost data.

How to login Windows Vista if you don't have administrator password?

Do you forget Windows Vista Administrator Login Password ago? Oh no! Not to fear though there are ways to get back in, and I will lead you through the steps of password recovery, if your lost vista password, or it's a lost password, this tutorial is just for you!

Instructions

Step 1

First before we go on to the in depth steps, are you sure you can't remember and you forgot password? Have you thought of everything? Dates, names, places, foods, birthdays, etc?
No?
Still can't remember?
Ok, not a problem, read on :-)

Step 2

Are you an administrator account or a standard user on the computer? If there are other users on the computer, and one of them is an administrator, they can go on and make the system reset password.
If your the administrator then your in a pickle! Keep reading :-)

Step 3

You should first try recovery tools password, which you will recover your password. Freeware programs I have listed some of the funds is very useful for the restoration of the password.

Step 4

If that fails the only other way would be to reinstall Windows....

Step 5

While this does not happen to you if you like, to prevent this by using a hard reset Windows Vista password, do so by following these steps please:

Step 6

provided by me

Click on the start button and then the control panel.

Step 7

provided by me

Next click on the user accounts and family safety icon.

Step 8

provided by me

Then click on user accounts on the next screen.

Step 9

provided by me

First insert a USB flash drive, or floppy, then in the menu on the left, click the create a password reset disk link.

Step 10

When the pop-up appears click next.
In the "I want to create a password key disk in the following drive: " choose your drive you want to write to.

Step 11

Click next, keep the disk in the drive, now enter your current password, and click next.

Step 12

When that is done, remove the disk and store it somewhere safe....this is your password reset disk

Step 13

To use this disk do the following:

If you forget your password and begin where you password is a connection, he said: "Forgot your password? You can insert your CD, click on this link and click continue.

Forgot Windows login Password? 6 Ways to Recover and Reset Password in Windows 7/Vista/XP/2003/2K/NT

What should you do when you've lost the password to connect to Windows? Ask an administrator to reset the password to access you. If you are a director yourself, and you can not remember your administrator password, the problem of having a little 'difficult, and probably difficult to find the "forgotten password" again. Before launching a search on the recovery CD or DVD for Windows format and reinstall Windows on your computer, here are some ways to unlock the groped for Windows to access the new system, at least to reset the password password.

Method 1: Take a rest, and try hard to remember the forgotten password

Sometimes, human beings are a bit "strange. You will not get the thing you need for urgency. Thus, a cafe, take a glance or even return after a few days, you may find that suddenly "remember" your Windows password.

Method 2: Try Blank Password Administrator Login Backdoor

In Windows XP (not Windows Vista as Administrator account is not enabled by default), is built in Administrator user account that has administrative rights, enabled by default, and no word password to protect access of the account was. If you have not changed the administrator password, and then try to connect to Windows XP without a password.

Method 3: Reset password from another user account with administrator credentials

If you can not connect to Windows using a special user account, but you can access another account that has administrative credentials, follow these steps on how to do the trick:

1. Log on to Windows by using another administrator account that has a password that you remember. You may need to start Windows in the safe mode.


2. Click Start, and then click Run.


3. In the Open box, type “control userpasswords2″, and then click OK.


4. Click the user account that you forgot the password for, and then click Reset Password.


5. Type a new password in both the New password and the Confirm new password boxes, and then click OK.

Method 4: Windows Password Recovery Tool 3.0

1. Download and burn the ISO file on to a CD or USB flash drive


2. Boot from the CD or USB flash drive
   

   NOTE:
   To reboot your PC with a CD/DVD disk, it’s necessary to change your computer’s setting to make it boot from the CD/DVD.
   
   Click here To learn how to set BIOS to boot from the CD/DVD-ROM
   
   Click here To learn how to set BIOS to boot from the USB Flash Drive

   
   


3. When the CD/DVD or USB disk boots, you’ll see Windows Password Recovery Tool 3.0 is initializing .


4. Select Windows installation to be processed


5. Select the user name whose password you want to reset and click "Reset" button to reset the password.


6. A message is displayed. Click "Yes" to confirm your action. Or, click "No" to undo your selection.


7. "Success" message is displayed after the user’s password has been successfully reset.


8. You have changed your forgotten password to a blank one. Remove the Windows Password Recovery Tool 3.0 bootable CD/DVD or USB Flash Drive and click “Reboot” button to reboot the computer. Now you are able to log into your computer without a password! .


9. Remove the CD or USB flash drive and reboot the computer.

Method 5: Windows Password Key 8.0

1. Download and burn the ISO file on to a CD or USB flash drive


2. Boot from the CD or USB flash drive
   

   NOTE:
   To reboot your PC with a CD/DVD disk, it’s necessary to change your computer’s setting to make it boot from the CD/DVD.
   
   boot from cd/dvd
   
   boot from usb

   
   


3. When the CD/DVD or USB disk boots, you’ll see Windows Password key 8.0 is initializing .
   


4. Chose Windows installation to be processed
   


5. Look the user name whose password you want to reset and type its number to reset the password.
   


6. A message is display. Type "Y" to confirm your action. Or, type "N" to undo your selection.
   


7. "Success" message is displayed after the user’s password has been successfully reset. You have changed your forgotten password to a blank one. Remove the Windows Password key 8.0 bootable CD/DVD or USB Flash Drive and click “Reboot” button to reboot the computer. Now you are able to log into your computer without a password! .
   


8. Remove the CD or USB flash drive and reboot the computer

Method 6: Windows Password Recovery 6.0